The roller blind system can be controlled via Z-wave using the Philio Roller Shutter Controller PHI_PAN08. See the diagram, which you can download below. The roller blinds can thus be controlled, for example, via Fibaro HC2 .
It is also possible to control the roller blind via Z-Wave with our transmitter box and here you can use our luxury model, which has soft start and soft stop and connects directly to 230V. You can download charts for the two connection modes below:
Note: Remember to order the transmitter if you want to control via transmitter box.
ODSIF Intelligence Made Easy
Motorized electric roller blind for control via Z-wave and Fibaro HC2
Motorized electric roller blind which can be controlled via Z-wave and Fibaro Home Center.
Slim model Ø38 with 12V power supply.
-- ORDER HERE --
Stored fabric-
White blackout fabric: White blackout fabric 24.22 GBP,- m²
Gray blackout fabric: Gray blackout fabric 32.53 GBP,- m²
Black blackout fabric: Black blackout fabric 32.53 GBP,- m²
White fabric RAL9010: White fabric, RAL 9010 27.71 GBP,- m²
White coarse mask for sun protection: White coarse mesh screen 5% transparent 34.94 GBP,- m²
Recommended accessories for KNZ and z-wave roller blinds
Included on delivery
- Wall and ceiling fittings
- 2.5 m aluminum tube with double-sided tape for fabric
- Screws and screw plugs
- User Manual
- Diagram - for Z-waveX
Technical information
| Material, rail: | Aluminum |
| Tube diameter: | Ø38 mm |
| Motor speed: | 30 rpm. |
| Connection: | 12V transformer |
| Connection of transmitter: | Directly in 230V |
| Max. width: | 250 cm |
| Maximum weight for curtain: | Max. 2,5 kg/m |
More info
|
Frequently asked questions |
Or send email: stopSpam()